we produce ANSI Globe Valve Suppliers china

Main Product ANSI Globe Valve Suppliers china:

1.    Gate valve: Cast Steel Gate Valve, Forged Steel Gate Valve, Flat-plate Gate valve.

2.    Check valve: Swing Check Valve, Lift Check Valve.

3.    Globe valve: Cast Steel Globe valve, Forged steel Globe valve

4.Ball valve:  API Ball Valve, Trunnion-mounted ball valve,

Forged trunnion -mounted ball valve, Floating fully welding ball valve

5.Plug valve: Sleeve type soft sealing plug valve,

Inverted pressure balance lubricated plug valve.

6.Butterfly valve: Mental-seal butterfly valve, Wafer mental butterfly valve,

                Flanged mental -seal butterfly valve

                Laminated mental -seal butterfly valve

7.Strainer: Y-Type Strainer, Gasket Strainer

8.Flanges: Steel Pipe Flanges, Butt-welding Ends

For more information,pls visit http://www.tongchanvalves.com/Globe-Valve/list_57_1.html

Cast iron valves suppliers china

Cast iron valves suppliers china name:
DIN 3356 GJL 250 gland packing globe valve/ stop valve pn16
DIN cast iron/ductile iron GG25/GGG40, straight through with flanges, globe valve pn16
DIN 3356 pn16 cast iron/ductile iron globe valves manufacturer in China
DIN gg25 cast iron globe valves/stop valves pn16 with YUANDA brand
DIN CE certified cast iron globe valve flanged type PN16

Model	YUANDA/J41H-16
Standard	Design: DIN3356/EN13789 Face-to-face: DIN3202-F1/EN558 Flange: EN1092 PN16 Inspection: EN12266-1
Pressure rating	PN16
Size range(mm)	DN15~DN300
Material	Body/Bonnet	Cast iron/Ductile iron GG25/GGG40/GGG50/GJL250/JL1040
	Stem	Stainless steel X20Cr13
	Seal ring	Stainless steel X20Cr13/304
Dimension	Contact us for specific drawing.

For more information,pls visit http://www.tongchanvalves.com/about/list_7_1.html

Cast Iron Wafer Type Butterfly Valves china

Cast Iron Wafer Type Butterfly Valves china

Connection form: Wafer
Working temperature: -14 degC<T<150 degC
Working pressure: PN<1.6
Seal form: Auto sealed
Material of seal surface: Soft sealed
Structure: Center sealing
Body material: Cast iron, ductile iron, stainless steel304/316, carbon steel
Disc material: Ductile iron coated by nylon, ductile iron coated by nickel, stainless steel 304/316, aluminum bronze
Shaft material: Stainless steel 304/316/416
Seal ring material: NBR, EPDM, Fluorine Rubber, Silicon Rubber, PTFE
Color: Depends of the inquiry
Packing: Plastic inside and Plywood case outside

Cast Iron Wafer Type Butterfly Valves china

Conventional packing:
For the Valves, Expansion Joint, Water Meter, we can use veneer board case.
For the pipe, we use the Woven bag.
For the flange & Fittings, we use the veneer board case and veneer board pallet with plastic film.

For more information,pls visit http://www.tongchanvalves.com/product/list_22_1.html

gate valve manufacturers in china

gate valve manufacturers in china Advantages:
1. The fastest delivery
2. The lowest price
3. Most comprehensive standards and materials for your choice.
4.100% export.
5. Our products EXPORT to Africa, Oceania, mid east, eastern Asia, Western Europe etc
Main Parameters :

Design and Manufacture:API 602,API 600,BS1414,BS6364
Face to Face Dimension:ASME B16.10,EN558

gate valve manufacturers in china

Flange Connection Dimension:ASME B16.5

BW Connection Dimension:ASME B16.25

Pressure-Temperature Ratings:ASME B16.34

Test and Inspection:API 598,BS6364

Main Materials:LF2,LF3,F304,F316 ,LCB,LCC,LC3,CF8,CF8M.

For more information,pls visit http://www.tongchanvalves.com/

Cast Iron Wafer Type Butterfly Valves china

Cast Iron Wafer Type Butterfly Valves china Specifications:
Size: DN50-1200

1.Body: Cast Steel, Stainless Steel

2.Disc: CF8/ CF8M/ WCB

3.Seat: NBR/EPDM/PDFE /VITON

4.Color: Any color according to customer requirement

5.Working pressure: PN10/ 16/150lb

6.Flange standard: PN10/ 16/ ANSI150

Cast Iron Wafer Type Butterfly Valves china

1. Flanged butterfly valve, designed to comply with MSS-SP-67, BS5155, and API609. Compatible with GB, DIN, BS, ANSI flanges. Face to face according to ISO 5752.

2. Characteristic of wafer type spline butterfly valve is to splice the rubber liner on the body, the strength more highly and the seal more reliably for the seat.

3. The spline is between the shaft and disc.

4. Available in size DN50---DN1200

5. Available with handles, manual gear operators, and electric or pneumatic actuators

For more information,pls visit http://www.tongchanvalves.com/product/list_22_1.html

butterfly valve manufacturers in china

butterfly valve manufacturers in china Features:
Valve disc is made from forging.
Valve body is made from forging.
Manual handle: pull handle, plastic gripper handle or stainless steel gripper handle
Gasket: EPDM, silicone or Viton
All gaskets are FDA approved
Max. Pressure: 16BAR for welding connections; 10BAR for other connections
Min. Pressure:0.2BAR
Compact design, easy maintenance and high torque

butterfly valve manufacturers in china

Connection end: Weld, tri-clamped, union, flange,male threading, female threading
Standard: DIN, SMS, ISO, 3A, IDF
Material: SS304, SS316L
Inside surface finish: Ra0.4
Size: DN20-DN300 ,  3/4"-10"
Application: Food, beverage, dairy, pharmacy, chemical or any food processing industries

For more information,pls visit http://www.tongchanvalves.com/

ductile iron valves manufacturers

we are ductile iron valves manufacturers,pls contact us.
1) Product information: the gate valves supplied are mainly used for adjusting water, steam, oil, gas, and natural gas in chemical industries

2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150

3) Connection type: flanged type, push-on type, mechanical joint type, plain ends type

4) Material:

  a) Body : Ductile Iron GGG500-7

  b) Wedge : D/I , core fully vulcanized with NBR or EPDM rubber

  c) Wedge Nut : Brass

  d) Stem : Stainless steel , BS970 431S29 or DIN17440x20Cr13

  e) Gasket : NBR

  f) Bonnet : GGG500-7

  g) O ring : NBR

  h) Washer : Carbon steel or Stainless steel .

ductile iron valves manufacturers

5) Size: 50-400mm/2" - 16"

6) Pressure grade: PN10, PN16

7) Coating:

    a) Fusion-bonded epoxy 200-250 microns inside and out side

    b) Coating as per customers' requirement

8) Package : carton for each item , wooden boxes outside .

For more information,pls visit http://www.tongchanvalves.com/about/list_7_1.html

Cast Iron Wafer Type Butterfly Valves china

Cast Iron Wafer Type Butterfly Valves china Main Features:
The turning center of the butterfly plate is on the center line of the valve body and the sealing face section of the butterfly plate. In closing, the ex-circle sealing face of the butterfly plate will extrude the valve seat made of synthetic rubber, generating elastic deformation on the seat to form an elastic force used as a sealing specific pressure so as to guarantee the tightness of the butterfly valve.

All the cargoes under inspection before the shipment.

Cast Iron Wafer Type Butterfly Valves china

Conventional packing:
For the Valves, Expansion Joint, Water Meter, we can use veneer board case.

For the pipe, we use the Woven bag.

For the flange & Fittings, we use the veneer board case and veneer board pallet with plastic film.

In addition, we can change the shape of the packaging according to customer requirements.

mode of transportation:

1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;

2. By Air or by Sea for batch goods, for FCL; Airport/ Port receiving;

3. Customers specifying freight forwarders or negotiable shipping methods

For more information,pls visit http://www.tongchanvalves.com/product/list_22_1.html

butterfly valve manufacturers in china

we are butterfly valve manufacturers in china,if you need our products,pls leave us messages/
1.Material: Casted Iron
2.Connection Ends: Butt Clamp
3.Size: DN15~DN100 As Customers' Requirement
4.Pressure: 150LB
Application: Applied to stainless steel pipeline system

Product name	SS304 Casting Butterfly Valve Manufacturer in China
1)Material	Casted Iron
2)Size	DN15~DN100
3)Certificate	ISO9001: 2000,CE, CIQ, SGS
4)Working pressure	1000psi(6.4MPa)
5)Connection Ends	Butt Clamp
6)Suitable medium	Water, Oil , Air and some corrosive liquid
7)Temperature Range	-20-200 degree C
8)Investment	casting steel
Our advantage	Survival by quality and development by credibility. Quality first, customer upmost !
	Can do OEM products
Delivery time	Usually 25 days around and can negotiate as per order qty
Shipping port	Ningbo, Shanghai
Term of Payment	30% TT deposit, the balance against copy of B/L
Package detail	inner CTN, outside plywood case
MOQ	20 PCS/size
Capacity to produce	100, 000 PCS/week

For more information,pls visit http://www.tongchanvalves.com/